The EU projects WALTER and EUWB will organize a measurement event in order to evaluate the initial draft proposal certification procedures for the upcoming ETSI DAA UWB harmonized standard. During this event manufacturers of DAA enabled UWB devices are invited to provide devices which could at least cover some parts of the proposed procedures. Here devices only supporting the detect part would also be welcome if the needed information are available to the measurement equipment for evaluation of the detection and identification time.
For each of the registered DAA capable devices a one day measurement session is planned using the available equipment and if needed the measurement chamber of the European commissions JRC (Joint research Center) in ISPRA. The initial tests will be carried out using a conducted test setup with the possibility to evaluate subsets of the parameters and procedures using a radiated setup.
During the test the full DAA certification procedure proposed by ETSI in an initial draft version (TR 102 763 V1.1.1) or only parts of the procedures will be covered. The individual DAA device test results will be confidential.
Main parameter to be evaluated:
- Detection thresholds
- Detection times
- Pattern identification
- Detection probabilities
- Avoidance capabilities (band switching, sub band notching, band group switching, LDC operation, etc.)
- Test time of the proposed procedures
The conclusions of the evaluation test will be used to update and change the procedure in order to guarantee a smooth usability of the proposed test during the final certification processes using the ETSI DAA standard.
In association with the evaluation event a one-day workshop is planned on Monday (06.07.2009) to give a detailed insight into the European DAA procedure. During this workshop the project plans to collect the feedback from all potential DAA users and manufacturers independent of the availability of DAA devices.
Registration DAA event: Until 15. June 2009
Registration of DAA capable devices for the DAA event until 1. June 2009
AGENDA available here.
For any question and for registration, please contact Friedbert BERENS.
There are three airports located nearby Ispra: Malpensa airport, Milan Linate and Lugano Agno Airport.
Navette services are organised between JRC Ispra and local airports.
Trains run between Milano (Central Station or Piazza Garibaldi) and Sesto Calende, the nearest station with frequent trains to the JRC. Trains also run (infrequently) between Novara and Ispra.
Navette services are organised between JRC Ispra and railway stations.
The Joint Research Centre is situated at Ispra on the eastern shore of Lake Maggiore, about 60 km NW of Milan. From the A8/A26 motorway take the exit for Sesto Calende / Vergiate. From there, follow the superstrada north to 'Laveno' and ‘Besozzo’, passing the towns of Mercallo and Comabbio. At the seventh set of traffic lights, turn left to ‘Cadrezzate’. Follow the road through Travedona Monate and Cadrezzate, down the hill to the roundabout in front of the entrance to the JRC. Car parking is to the right of the entrance gate.
21017 - Ispra
Note: Navette Services are organized and provided free of charge by the JRC
EventList powered by schlu.net